YunXiang Develop Co.,Limited CopyRight 2008-2010
Room 8806-8808 World Financial Center No 2 North-Dagu Road, Tianjin, China
Tel:+86-22-28704897 Fax:+86-22-28704897 Email:email@example.com
API Grade Sucker Rods
Yunxiang's sucker rods are manufactured according to API 11B Specifications. Currently, the Company market 3 types of API sucker rods Grade D Alloy and Grade D Special which are formulated from different alloys：AISI 4130 (Grade D), AISI 4142 (Grade D) and AISI 4720 (Grade KD).
1. Rod Bar
The incoming rod bars are inspected for any damage, fault and discontinuities.Before arranging the rod bars for production process, carry out chemical composition testing, dimensional inspection & surface quality inspection. High quality standard is maintained at various stage inspections.
Chemical Composition: See below table.
Rod bars are manufactured from hot rolled alloy steel. Rod bars are machine straightened and cold drawn to the required size. The rod bar ends are hot forged according to API designed sizes. The rods are then heat treated over the full length.As per requirement of mechanical properties, the rods are normalized and tempered to the specified level or quenched and tempered to the required hardness and strength. Care is taken to achieve metallographic structure with no residual stresses in the rod.A sample specimen is cut from the heat treated material and is tested for ultimate tensile strength, yield strength and elongation. The rod is then again checked for straightness. The forged ends are properly aligned with its body. Rods are cleaned by shot-blasting to remove any scale and oxidation. The forged ends are machined on C.N.C. Lathe machines as per API dimensions and checked with API approved gauges.
Mechanical Properties: See below table.
3. Packaging and Storage
The sucker rods are then coated with rust inhibitors and carefully palletized in bundles for safe transport and handling.
Table: Chemical Composition / Mechanical Properties / Heat Treatment
*Yunxiang reserves the right to deviate from the above listed percentages of a particular chemical element of a grade of steel, however we will always adhere to the requirements of API Specification 11B.
*Tensile value is the only steel sucker rod physical requirement of API Specification 11B. All other physical properties are expected values only and Yunxiang reserves the right to deviate from the above listed values.